The Ohmeda Medical Panda™ Model 3300 Baby Warmer System provides a controlled source of radiant heat for infant and pediatric patients. The control system uses a microprocessor and provides both manual and servo modes of operation. The patient temperature, control temperature, and elapsed time displays are digital for ease of viewing. The control panel includes a one-hour elapsed timer with time displayed in minutes and seconds. The timer features optional audible tones for use during Apgar scoring. A complete audio and visual alarm system is included on the control panel. The model 3300 has integral bed for infants and is intended for procedures and long-term care in the Nursery and Labor & Delivery.

Standard Features:

Support structure provides stability for the radiant heater and optional accessories
5” (13 cm) casters with 2 front independent locking casters
Heater assembly includes rotating radiant heater, parabolic reflector, observation light and visual alarm light.
Control Unit used to operate the radiant heater and the observation light.
- Performs regular self-checks during operation including failure diagnostics
- Manual or Servo operation modes maybe selected
- Alarms – alert the operator of low or high patient temperature, a skin temperature probe failure, a power failure, equipment (heat off) failure or a check patient prompt.
Bed Platform:
- Foam mattress – (18.2”w x 25.2”l, 46.2 cm x 64 cm)
- Transparent mattress support panel
- 4 fold-down transparent side panels
Integrated location beneath patient surface for an X-ray cassette holder and tray
Tiltable bed platform with one-hand operated hydraulics system for dampened motion for Trendelenburg and Fowler positioning.
Chest drainage hanger
Integrated drawer storage
Reusable skin temperature probe
On/off switch, power cord and hospital grade power plug

Specifications:

Overall Dimensions:

Height: 73” (185 cm)
Depth: 41” (104 cm)
Width: 26” (66 cm)
Minimum weight: 210 lbs (96 kg)
Patient surface: 18.2” x 25.2” (46.2 cm x 64 cm)
Casters: 5” (13 cm) 2 locking/2 non-locking
Standard Drawer: 14.96” x 15.35” x 3.94” (38 x 39 x 10 cm) 930 cubic inches per drawer (14,820 cm3 per drawer)
Deep Drawer: 14.96” x 15.35” x 3.94” (38 x 39 x 10 cm) (34,086 cm3 per drawer)

Bed tilt positons: ±10° continuously adjustable

Power requirement: 120V, 50/60 Hz Model 115V ± 10%, 6.6 Amps

Heater Output:

540 watts ± 5% at maximum % power setting.
Average Energy at mattress level at maximum % power setting: 34 mw/cm2

Ohmeda 3300 Infant Warmer System Refurbished